Yes, that does indeed exist: With the glass door cupboard “Open”. We offer a solution which, on the one hand, takes up many advantages of the walk-in wardrobe. Thanks to glass doors and side panels the daylight can pass through the entire storage space and create an open, non-constricting room image, while integrating the benefits of doors in this cupboard system.
F.A.Q.
The internal dimensions of the pull-out shelves for an 89 cm module are: width approx. 79.6 cm, depth approx. 46.9 cm
The internal dimensions of the pull-out shelves for a 96 cm module are: width approx. 86.6 cm, depth approx. 46.9 cm
The internal dimensions of the pull-out shelves for a 103 cm module are: width approx. 93.6 cm, depth approx. 46.9 cm
For a narrow cabinet module with a width of 43.2 cm, the inside dimensions of the drawer are: width approx. 33.8 cm x depth approx. 46.9 cm
For a narrow cabinet module with a width of 50.1 cm, the inside dimensions of the drawer are: width approx. 40.7 cm x depth approx. 46.9 cm
Unfortunately not, but exist drawers inside the wardrobe: We offer double and triple drawer modules. Look at our accessories.
We can deliver the cabinet from 48 cm in all widths. In the configurator you can choose from different widths or specify the exact niche width. If you also want special dimensions, please contact us by e-mail to info@idaw.eu.
A freestanding wardrobe does not need a niche, but is – as the name implies – free, behind the back is a wall. Not only we deliver lacquered doors but also lacquered side panels.
We always deliver the drawer module completely, that means, that we provide a shelf for closing up. You place the module drawer on the cabinet base. However, if you want to mount it further up, you have to order one shelf from the accessories, on which you can install the drawer module at the position you want.
We supply two clothes rails and one shelf per wardrobe module, but if you need more, you can buy more clothes rails on request. Write us in the comments field.
With a cabinet height of up to 262 cm you can either have all or only a few mirrors made. You can select individual mirrored doors by first selecting the door handle model for the other doors. Then you will find the input field for the mirror doors in the configuration with the wording: “If you only want individual mirror doors, click here and enter the number and position.”
Take a look at our example videos which gives you a very good impression of the quality and colour of our cupboards. However if you still need to have a sample of the structure (melamined – ivory colour), we can send you one of dimension: 10 cm x 7 cm, for a processing fee of 15 € (including shipping costs). Regarding the lacquered doors colour, we can send you the sample of dimension: 20 cm x 20 cm for the processing fee of 45 € (including shipping costs). Please write us the email at info@idaw.eu for this request with the address where the sample must be sent. You will receive then the PayPall link for the payment. The production of the sample and the delivery will take 2-4 weeks.
Yes, there is. However, we recommend for optical reasons, to plan the cabinet up to 1 cm below the ceiling and leave this minimal gap open. Anyone wishing to close this narrow gap can use the joint sealer available in every hardware store, preferably in white or the ceiling color.
Of course, it is also possible to order a closing panel as an option, for example, if your room is higher than 295 cm, you have a very crooked ceiling, lamps are very close to the cabinet or you simply look for aesthetic reasons and need horizontal closing panel. To order it, just note your request in the comment field of the order form and write us the desired height of this panel and the lenght or the dimensions of the niche. In this case, we ask you of the additional cost of 120 euro for the closing bar.
Yes, they are. The mirror doors you can also order in a grey tinted mirror. These cost 100,- € more per door than the normal mirror doors. Please select the regular mirrored doors and note your request in the comment field. To pay the difference, select the bank transfer for the entire order – or if chosen other payment, the additional amount must be payed by the bank transfer.
The interior of the wardrobe is only available in the melamined, ivory-colored version.
We will inform you on the Saturday before the delivery week with an email about the scope of delivery and the planned delivery day. You will be contacted by our furniture shipping company in good time before the delivery, who will arrange a time slot with you for the delivery.
Before you begin to remove the mirror, remember that you should wear gloves as a safety precaution and put a piece of cloth underneath the door. The forst thing you have to do is to cover the whole mirror with adhesive tape in order to avoid further damages on the mirror. Then use a small tool (a plastic plaster would be perfect!) in order to pass between the mirror and the door and to lift the mirror up a little. Now start to peel it off slowly, safely and in one piece.
You can find a video here.
The internal dimensions of the pull-out shelves for an 89 cm module are: width approx. 79.6 cm, depth approx. 46.9 cm
The internal dimensions of the pull-out shelves for a 96 cm module are: width approx. 86.6 cm, depth approx. 46.9 cm
The internal dimensions of the pull-out shelves for a 103 cm module are: width approx. 93.6 cm, depth approx. 46.9 cm
For a narrow cabinet module with a width of 43.2 cm, the inside dimensions of the drawer are: width approx. 33.8 cm x depth approx. 46.9 cm
For a narrow cabinet module with a width of 50.1 cm, the inside dimensions of the drawer are: width approx. 40.7 cm x depth approx. 46.9 cm
The internal drawer dimensions for the 89 cm wide modules (with a cabinet depth of 61 cm) are: internal width approx. 72 cm, depth approx. 42.5 cm, height approx. 9.5 cm or front drawer approx. 12 , 8 cm.
The inner dimensions of the 96 cm wide modules are approx. 79 cm x approx. 42.5 cm x approx. 9.5 or approx. 12.8 cm.
The internal dimensions of the 103 cm wide modules are: approx. 86 cm x approx. 42.5 cm x approx. 9.5 or approx. 12.8 cm.
For a narrow cabinet module with a width of 43.2 cm, the inside dimensions of the drawer are: approx. 26.2 cm x approx. 42.5 cm x approx. 9.5 or approx. 12.8 cm.
For a narrow cabinet module with a width of 50.1 cm, the inside dimensions of the drawer are: approx. 33.1 cm x approx. 42.5 cm x approx. 9.5 or approx. 12.8 cm.
Ordering a sloping roof cabinet online from IDAW is very simple: we will help you measure it with our step-by-step instructions. If you still do not understand something and would like to speak to us, you can of course contact us during office hours by phone or via our chat.
- Measure the width over which your sloping cupboard should extend.
- Look at the depth that your closet can have: 61 cm or 45 cm are standard, but you can also order a depth to measure.
- For the slope, you proceed as follows: every meter of the cabinet width you measure the height to the roof slope, in front (where the cabinet doors will be) and in the back (where your cabinet back will stand): this enables us to calculate the roof pitch for your custom cabinet.
- At the end we ask you to take a very straight rod (e.g. a long aluminum cutting ruler, an iron or wooden rod or similar) and stop at the sloping roof: is the sloping roof straight or does the roof have one “Belly”?
We use this information to plan your new storage space miracle 🙂
Not necessarily: the side closing panels which goes on the left and right side of the wardrobe are painted in the color of the door and mounted at the door level. These closing panels can be adapted to skirting boards. However without them, the structure of fitted wardrobe is slightly easier to build, because you do not need to cut the dimensions of the skirting boards from the panels. The space available with or without skirting boards does not significantly affect.
Preferably not, just measure from wall to wall, as if there were no skirting boards. Therefor please tell us separately or in the comments for order the dimensions of the skirting boards. This becomes even more important in the case of skirting boards wider than 1.5 cm, so that we can verify that the assembly is possible.
No, you don’t. Please let us know the exact room height or the exact niche dimensions. Then we plan the wardrobe a little smaller (usually about 1 cm less high) so that it can be easily set up or inserted into the niche. On the other hand the width of the fitted wardrobe is already calculated with tolerance to built the wardrobe easily and to close it finally with the closing panels.
The last side panel of the wardrobe on the right side has the pre-drilled holes for the feets but at the point that would only allow the feet to be fitted outside the cupboard. Therefore the pilot holes have to be changed. To do this, enlarge the existing pilot hole with a 9 mm drill head – so that it can also be reached from the “inside direction” – and fix the feet on the left and towards the inside of the wardrobe.
You can find a video here.
Please let us know the available width without deduction. Only if baseboards are present or if they are not able to be removed, we must know their dimensions. This becomes even more important in the case of skirting boards wider than 1.5 cm, so that we can verify that the assembly is possible. It is also helpful if you send us a photo by email in parallel with your order.
In the configurator of the fitted wardrobe we ask for the indication of the niche height. For a freestanding cupboard made on measure we ask for information on how high the cabinet should be made: This must always be at least 1 cm less than the ceiling height of the room. Otherwise, the cabinet could not be built.
Unfortunately not. Our deliveries require a certain flexibility and an agreed time window. Contact us by email to clarify other options.
We always deliver the drawer module completely, that means, that we provide a shelf for closing up. You place the module drawer on the cabinet base. However, if you want to mount it further up, you have to order one shelf from the accessories, on which you can install the drawer module at the position you want.
In the price it is included the delivery “on the street” to the point of use. This means that there are no additional delivery costs, so delivery is free of charge. However, the driver of the truck is not obliged to carry the delivery into the house or in the apartment. Since our cabinets are robust and heavy versions, two physically fit people should accept the delivery and bring it into the house or appartement. Only for Switzerland you have only two chargeable delivery options: Delivery to the apartment; Delivery and installation.
In the configuration we show RAL colour examples. To answer our customer need we created an option and possibility to choose the other colours like Farrow & Ball or NCS colours. Just click on the box with the colour fan and write in the field, which will open, your chosen colour. However in our offer you can find some NCS or Farrow & Ball most requested ordered colours.
Unfortunately not, but exist drawers inside the wardrobe: We offer double and triple drawer modules. Look at our accessories.
Yes, you can. Choose a colour or simply enter the desired RAL colour code in the place provided below. You can view a RAL colour palette in furniture stores and hardware stores – or simply order them online.
Attention: additional information regarding colours from Farrow and Ball, RAL, NCS, etc ..
We reproduce these colours starting from the colour cards of these international manufacturers. As for the Farrow and Ball finish, we do not offer the alternatives proposed by Farrow and Ball, but our finishes (matte or glossy).
We also remind you that the paint must be different depending on the surface on which it is applied and the method used. In addition, the colour rendering depends highly on the light in the room and how it reflects on the different surfaces. For this reason, if you are considering ordering a wardrobe of the same Farrow and Ball, RAL or NCS (or others) colour as the wall, please note that the two colours will never be perfectly identical, but very similar.
A tip to take into consideration: sometimes choosing a different colour that matches the wall is the most beautiful solution !!
We can deliver the cabinet from 48 cm in all widths. In the configurator you can choose from different widths or specify the exact niche width. If you also want special dimensions, please contact us by e-mail to cristina@idaw.eu.
A fitted wardrobe is a cupboard that can be installed in a wall niche. But it can also fill an entire room width. In any case, there are walls to the right and left of the fitted cupboard. As a rule, closing panels are mounted on the right and left in a plane with the doors, so that the niche is completely filled.
Yes, that does indeed exist: With the glass door cupboard “Open”. We offer a solution which, on the one hand, takes up many advantages of the walk-in wardrobe. Thanks to glass doors and side panels the daylight can pass through the entire storage space and create an open, non-constricting room image, while integrating the benefits of doors in this cupboard system.
We supply two clothes rails and one shelf per wardrobe module, but if you need more, you can buy more clothes rails on request. Write us in the comments field.
Yes, there is. However, we recommend for optical reasons, to plan the cabinet up to 1 cm below the ceiling and leave this minimal gap open. Anyone wishing to close this narrow gap can use the joint sealer available in every hardware store, preferably in white or the ceiling color.
Of course, it is also possible to order a closing panel as an option, for example, if your room is higher than 295 cm, you have a very crooked ceiling, lamps are very close to the cabinet or you simply look for aesthetic reasons and need horizontal closing panel. To order it, just note your request in the comment field of the order form and write us the desired height of this panel and the lenght or the dimensions of the niche. In this case, we ask you of the additional cost of 120 euro for the closing bar.
Yes, they are. The mirror doors you can also order in a grey tinted mirror. These cost 100,- € more per door than the normal mirror doors. Please select the regular mirrored doors and note your request in the comment field. To pay the difference, select the bank transfer for the entire order – or if chosen other payment, the additional amount must be payed by the bank transfer.
Yes. Corner cupboards are ideal if there is enough space. This is usually the case from 2 meters per wall unit. We offer different solutions in the design of our fitted or freestanding wardrobes. Please contact us by e-mail at cristina@idaw.eu.
In this case, the freestanding wardrobe is a good solution. You just push him into the corner. Upon request, we can also provide a mixed solution of free-standing wardrobe and fitted wardrobe. The free/visible cupboard side panel is then lacquered and the side in the corner receives a closing panel. If you want this solution, please contact us by e-mail at cristina@idaw.eu.
We will inform you on the Saturday before the delivery week with an email about the scope of delivery and the planned delivery day. You will be contacted by our furniture shipping company in good time before the delivery, who will arrange a time slot with you for the delivery.
If we have not yet passed the order on to production, a change or addition is usually still possible. Please contact us as soon as possible. If we have already started to produce, a change is no longer possible, but an addition may still be possible.
With a cabinet height of up to 262 cm you can either have all or only a few mirrors made. You can select individual mirrored doors by first selecting the door handle model for the other doors. Then you will find the input field for the mirror doors in the configuration with the wording: “If you only want individual mirror doors, click here and enter the number and position.”
Yes you can. Please contact us by email or write down your request in the comment field of the order form.
Yes, they are. The door thickness of 18 mm is always included in the cabinet depth.
The terminal wardrobe sides as also the side panels of our wardrobes are 25 mm thick.
Take a look at our example videos which gives you a very good impression of the quality and colour of our cupboards. However if you still need to have a sample of the structure (melamined – ivory colour), we can send you one of dimension: 10 cm x 7 cm, for a processing fee of 15 € (including shipping costs). Regarding the lacquered doors colour, we can send you the sample of dimension: 20 cm x 20 cm for the processing fee of 45 € (including shipping costs). Please write us the email at info@idaw.eu for this request with the address where the sample must be sent. You will receive then the PayPall link for the payment. The production of the sample and the delivery will take 2-4 weeks.
The interior of the wardrobe is only available in the melamined, ivory-colored version.
Changing a dust seal from a wardrobe door (for two people, it is a matter of few minutes):
- Check that the lenght of the substitutive dust seal is the same of the older one. In case the new dust seal is too long, shorten it accordingly. If it corresponds to the lenght of the older one, proceed as follows:
- Lay the door on the floor; it is better to lay it on a piece of cloth, so that the lacquered finish of the door will not be scratched.
- Mark the begining and the end of the older dust seal with a pencil, while it is still fixed on the door. If the new dust seal is not asseambled correctly, there is the risk that the door will not open.
- Start to gently remove the dust seal from the door a bit at a time, until you peel it off entirely in one piece; this whole passage has to be done while you lift the staples up.
- Now unroll the new dust seal and place it so that it sets on its proper place along the external edge.
- Before you fix the dust seal, check the dimensions of the screws we sent you: they should not be longer than the door’s thickness.
- Place the screws on the inner side of the door and over the dust seal (the screws should distance 10-15 cm from one another); screw the dust seal gently to the wooden pannel of the door.
- After that, clip the dust seal, beginnig either from the top or the bottom, until it is completely attached to the door (you should hear a „click“).
- Finally, reasseamble the door to the wardrobe.
You can find the video here.
The end profil is a slight side panel that covers the visible front end of the wardrobe side.
Changing an end profil is quite easy, and you can easily do it yourself too. But remember that you should wear gloves as a safety precaution. After you have lain the wardrobe side panel on a work table, tap gently on one of the extremities of the end profil. Now remove it delicately and carefully. It will come off as one entire piece, and the lacquered finish will not be damaged or ruined.
You can find the video here.
Before you begin to remove the mirror, remember that you should wear gloves as a safety precaution and put a piece of cloth underneath the door. The forst thing you have to do is to cover the whole mirror with adhesive tape in order to avoid further damages on the mirror. Then use a small tool (a plastic plaster would be perfect!) in order to pass between the mirror and the door and to lift the mirror up a little. Now start to peel it off slowly, safely and in one piece.
You can find a video here.
The internal dimensions of the pull-out shelves for an 89 cm module are: width approx. 79.6 cm, depth approx. 46.9 cm
The internal dimensions of the pull-out shelves for a 96 cm module are: width approx. 86.6 cm, depth approx. 46.9 cm
The internal dimensions of the pull-out shelves for a 103 cm module are: width approx. 93.6 cm, depth approx. 46.9 cm
For a narrow cabinet module with a width of 43.2 cm, the inside dimensions of the drawer are: width approx. 33.8 cm x depth approx. 46.9 cm
For a narrow cabinet module with a width of 50.1 cm, the inside dimensions of the drawer are: width approx. 40.7 cm x depth approx. 46.9 cm
The internal drawer dimensions for the 89 cm wide modules (with a cabinet depth of 61 cm) are: internal width approx. 72 cm, depth approx. 42.5 cm, height approx. 9.5 cm or front drawer approx. 12 , 8 cm.
The inner dimensions of the 96 cm wide modules are approx. 79 cm x approx. 42.5 cm x approx. 9.5 or approx. 12.8 cm.
The internal dimensions of the 103 cm wide modules are: approx. 86 cm x approx. 42.5 cm x approx. 9.5 or approx. 12.8 cm.
For a narrow cabinet module with a width of 43.2 cm, the inside dimensions of the drawer are: approx. 26.2 cm x approx. 42.5 cm x approx. 9.5 or approx. 12.8 cm.
For a narrow cabinet module with a width of 50.1 cm, the inside dimensions of the drawer are: approx. 33.1 cm x approx. 42.5 cm x approx. 9.5 or approx. 12.8 cm.
Unfortunately not. Our deliveries require a certain flexibility and an agreed time window. Contact us by email to clarify other options.
We always deliver the drawer module completely, that means, that we provide a shelf for closing up. You place the module drawer on the cabinet base. However, if you want to mount it further up, you have to order one shelf from the accessories, on which you can install the drawer module at the position you want.
In the price it is included the delivery “on the street” to the point of use. This means that there are no additional delivery costs, so delivery is free of charge. However, the driver of the truck is not obliged to carry the delivery into the house or in the apartment. Since our cabinets are robust and heavy versions, two physically fit people should accept the delivery and bring it into the house or appartement. Only for Switzerland you have only two chargeable delivery options: Delivery to the apartment; Delivery and installation.
In the configuration we show RAL colour examples. To answer our customer need we created an option and possibility to choose the other colours like Farrow & Ball or NCS colours. Just click on the box with the colour fan and write in the field, which will open, your chosen colour. However in our offer you can find some NCS or Farrow & Ball most requested ordered colours.
Unfortunately not, but exist drawers inside the wardrobe: We offer double and triple drawer modules. Look at our accessories.
Yes, you can. Choose a colour or simply enter the desired RAL colour code in the place provided below. You can view a RAL colour palette in furniture stores and hardware stores – or simply order them online.
Attention: additional information regarding colours from Farrow and Ball, RAL, NCS, etc ..
We reproduce these colours starting from the colour cards of these international manufacturers. As for the Farrow and Ball finish, we do not offer the alternatives proposed by Farrow and Ball, but our finishes (matte or glossy).
We also remind you that the paint must be different depending on the surface on which it is applied and the method used. In addition, the colour rendering depends highly on the light in the room and how it reflects on the different surfaces. For this reason, if you are considering ordering a wardrobe of the same Farrow and Ball, RAL or NCS (or others) colour as the wall, please note that the two colours will never be perfectly identical, but very similar.
A tip to take into consideration: sometimes choosing a different colour that matches the wall is the most beautiful solution !!
We can deliver the cabinet from 48 cm in all widths. In the configurator you can choose from different widths or specify the exact niche width. If you also want special dimensions, please contact us by e-mail to cristina@idaw.eu.
Yes. Corner cupboards are ideal if there is enough space. This is usually the case from 2 meters per wall unit. We offer different solutions in the design of our fitted or freestanding wardrobes. Please contact us by e-mail at cristina@idaw.eu.
In this case, the freestanding wardrobe is a good solution. You just push him into the corner. Upon request, we can also provide a mixed solution of free-standing wardrobe and fitted wardrobe. The free/visible cupboard side panel is then lacquered and the side in the corner receives a closing panel. If you want this solution, please contact us by e-mail at cristina@idaw.eu.
We will inform you on the Saturday before the delivery week with an email about the scope of delivery and the planned delivery day. You will be contacted by our furniture shipping company in good time before the delivery, who will arrange a time slot with you for the delivery.
If we have not yet passed the order on to production, a change or addition is usually still possible. Please contact us as soon as possible. If we have already started to produce, a change is no longer possible, but an addition may still be possible.
With a cabinet height of up to 262 cm you can either have all or only a few mirrors made. You can select individual mirrored doors by first selecting the door handle model for the other doors. Then you will find the input field for the mirror doors in the configuration with the wording: “If you only want individual mirror doors, click here and enter the number and position.”
Yes you can. Please contact us by email or write down your request in the comment field of the order form.
Yes, they are. The door thickness of 18 mm is always included in the cabinet depth.
The terminal wardrobe sides as also the side panels of our wardrobes are 25 mm thick.
Take a look at our example videos which gives you a very good impression of the quality and colour of our cupboards. However if you still need to have a sample of the structure (melamined – ivory colour), we can send you one of dimension: 10 cm x 7 cm, for a processing fee of 15 € (including shipping costs). Regarding the lacquered doors colour, we can send you the sample of dimension: 20 cm x 20 cm for the processing fee of 45 € (including shipping costs). Please write us the email at info@idaw.eu for this request with the address where the sample must be sent. You will receive then the PayPall link for the payment. The production of the sample and the delivery will take 2-4 weeks.
The interior of the wardrobe is only available in the melamined, ivory-colored version.
Changing a dust seal from a wardrobe door (for two people, it is a matter of few minutes):
- Check that the lenght of the substitutive dust seal is the same of the older one. In case the new dust seal is too long, shorten it accordingly. If it corresponds to the lenght of the older one, proceed as follows:
- Lay the door on the floor; it is better to lay it on a piece of cloth, so that the lacquered finish of the door will not be scratched.
- Mark the begining and the end of the older dust seal with a pencil, while it is still fixed on the door. If the new dust seal is not asseambled correctly, there is the risk that the door will not open.
- Start to gently remove the dust seal from the door a bit at a time, until you peel it off entirely in one piece; this whole passage has to be done while you lift the staples up.
- Now unroll the new dust seal and place it so that it sets on its proper place along the external edge.
- Before you fix the dust seal, check the dimensions of the screws we sent you: they should not be longer than the door’s thickness.
- Place the screws on the inner side of the door and over the dust seal (the screws should distance 10-15 cm from one another); screw the dust seal gently to the wooden pannel of the door.
- After that, clip the dust seal, beginnig either from the top or the bottom, until it is completely attached to the door (you should hear a „click“).
- Finally, reasseamble the door to the wardrobe.
You can find the video here.
The end profil is a slight side panel that covers the visible front end of the wardrobe side.
Changing an end profil is quite easy, and you can easily do it yourself too. But remember that you should wear gloves as a safety precaution. After you have lain the wardrobe side panel on a work table, tap gently on one of the extremities of the end profil. Now remove it delicately and carefully. It will come off as one entire piece, and the lacquered finish will not be damaged or ruined.
You can find the video here.
Before you begin to remove the mirror, remember that you should wear gloves as a safety precaution and put a piece of cloth underneath the door. The forst thing you have to do is to cover the whole mirror with adhesive tape in order to avoid further damages on the mirror. Then use a small tool (a plastic plaster would be perfect!) in order to pass between the mirror and the door and to lift the mirror up a little. Now start to peel it off slowly, safely and in one piece.
You can find a video here.
The internal drawer dimensions for the 89 cm wide modules (with a cabinet depth of 61 cm) are: internal width approx. 72 cm, depth approx. 42.5 cm, height approx. 9.5 cm or front drawer approx. 12 , 8 cm.
The inner dimensions of the 96 cm wide modules are approx. 79 cm x approx. 42.5 cm x approx. 9.5 or approx. 12.8 cm.
The internal dimensions of the 103 cm wide modules are: approx. 86 cm x approx. 42.5 cm x approx. 9.5 or approx. 12.8 cm.
For a narrow cabinet module with a width of 43.2 cm, the inside dimensions of the drawer are: approx. 26.2 cm x approx. 42.5 cm x approx. 9.5 or approx. 12.8 cm.
For a narrow cabinet module with a width of 50.1 cm, the inside dimensions of the drawer are: approx. 33.1 cm x approx. 42.5 cm x approx. 9.5 or approx. 12.8 cm.
Unfortunately not. Our deliveries require a certain flexibility and an agreed time window. Contact us by email to clarify other options.
In the price it is included the delivery “on the street” to the point of use. This means that there are no additional delivery costs, so delivery is free of charge. However, the driver of the truck is not obliged to carry the delivery into the house or in the apartment. Since our cabinets are robust and heavy versions, two physically fit people should accept the delivery and bring it into the house or appartement. Only for Switzerland you have only two chargeable delivery options: Delivery to the apartment; Delivery and installation.
If we have not yet passed the order on to production, a change or addition is usually still possible. Please contact us as soon as possible. If we have already started to produce, a change is no longer possible, but an addition may still be possible.
Yes, they are. The door thickness of 18 mm is always included in the cabinet depth.
The terminal wardrobe sides as also the side panels of our wardrobes are 25 mm thick.
We will inform you on the Saturday before the delivery week with an email about the scope of delivery and the planned delivery day. You will be contacted by our furniture shipping company in good time before the delivery, who will arrange a time slot with you for the delivery.
Take a look at our example videos which gives you a very good impression of the quality and colour of our cupboards. However if you still need to have a sample of the structure (melamined – ivory colour), we can send you one of dimension: 10 cm x 7 cm, for a processing fee of 15 € (including shipping costs). Regarding the lacquered doors colour, we can send you the sample of dimension: 20 cm x 20 cm for the processing fee of 45 € (including shipping costs). Please write us the email at info@idaw.eu for this request with the address where the sample must be sent. You will receive then the PayPall link for the payment. The production of the sample and the delivery will take 2-4 weeks.
Changing a dust seal from a wardrobe door (for two people, it is a matter of few minutes):
- Check that the lenght of the substitutive dust seal is the same of the older one. In case the new dust seal is too long, shorten it accordingly. If it corresponds to the lenght of the older one, proceed as follows:
- Lay the door on the floor; it is better to lay it on a piece of cloth, so that the lacquered finish of the door will not be scratched.
- Mark the begining and the end of the older dust seal with a pencil, while it is still fixed on the door. If the new dust seal is not asseambled correctly, there is the risk that the door will not open.
- Start to gently remove the dust seal from the door a bit at a time, until you peel it off entirely in one piece; this whole passage has to be done while you lift the staples up.
- Now unroll the new dust seal and place it so that it sets on its proper place along the external edge.
- Before you fix the dust seal, check the dimensions of the screws we sent you: they should not be longer than the door’s thickness.
- Place the screws on the inner side of the door and over the dust seal (the screws should distance 10-15 cm from one another); screw the dust seal gently to the wooden pannel of the door.
- After that, clip the dust seal, beginnig either from the top or the bottom, until it is completely attached to the door (you should hear a „click“).
- Finally, reasseamble the door to the wardrobe.
You can find the video here.
The end profil is a slight side panel that covers the visible front end of the wardrobe side.
Changing an end profil is quite easy, and you can easily do it yourself too. But remember that you should wear gloves as a safety precaution. After you have lain the wardrobe side panel on a work table, tap gently on one of the extremities of the end profil. Now remove it delicately and carefully. It will come off as one entire piece, and the lacquered finish will not be damaged or ruined.
You can find the video here.
In the price it is included the delivery “on the street” to the point of use. This means that there are no additional delivery costs, so delivery is free of charge. However, the driver of the truck is not obliged to carry the delivery into the house or in the apartment. Since our cabinets are robust and heavy versions, two physically fit people should accept the delivery and bring it into the house or appartement. Installation is not included, but can be booked. You can make a preliminary calculation of the assembly costs here.
In the configuration we show RAL colour examples. To answer our customer need we created an option and possibility to choose the other colours like Farrow & Ball or NCS colours. Just click on the box with the colour fan and write in the field, which will open, your chosen colour. However in our offer you can find some NCS or Farrow & Ball most requested ordered colours.
Yes, you can. Choose a colour or simply enter the desired RAL colour code in the place provided below. You can view a RAL colour palette in furniture stores and hardware stores – or simply order them online.
Attention: additional information regarding colours from Farrow and Ball, RAL, NCS, etc ..
We reproduce these colours starting from the colour cards of these international manufacturers. As for the Farrow and Ball finish, we do not offer the alternatives proposed by Farrow and Ball, but our finishes (matte or glossy).
We also remind you that the paint must be different depending on the surface on which it is applied and the method used. In addition, the colour rendering depends highly on the light in the room and how it reflects on the different surfaces. For this reason, if you are considering ordering a wardrobe of the same Farrow and Ball, RAL or NCS (or others) colour as the wall, please note that the two colours will never be perfectly identical, but very similar.
A tip to take into consideration: sometimes choosing a different colour that matches the wall is the most beautiful solution !!
Yes. Corner cupboards are ideal if there is enough space. This is usually the case from 2 meters per wall unit. We offer different solutions in the design of our fitted or freestanding wardrobes. Please contact us by e-mail at info@idaw.eu.
Take a look at our example videos which gives you a very good impression of the quality and colour of our cupboards. However if you still need to have a sample of the structure (melamined – ivory colour), we can send you one of dimension: 10 cm x 7 cm, for a processing fee of 15 € (including shipping costs). Regarding the lacquered doors colour, we can send you the sample of dimension: 20 cm x 20 cm for the processing fee of 45 € (including shipping costs). Please write us the email at info@idaw.eu for this request with the address where the sample must be sent. You will receive then the PayPall link for the payment. The production of the sample and the delivery will take 2-4 weeks.
Unfortunately not. Our deliveries require a certain flexibility and an agreed time window. Contact us by email to clarify other options.
We will inform you on the Saturday before the delivery week with an email about the scope of delivery and the planned delivery day. You will be contacted by our furniture shipping company in good time before the delivery, who will arrange a time slot with you for the delivery.
If we have not yet passed the order on to production, a change or addition is usually still possible. Please contact us as soon as possible. If we have already started to produce, a change is no longer possible, but an addition may still be possible.
Yes you can. Please contact us by email or write down your request in the comment field of the order form.
The end profil is a slight side panel that covers the visible front end of the wardrobe side.
Changing an end profil is quite easy, and you can easily do it yourself too. But remember that you should wear gloves as a safety precaution. After you have lain the wardrobe side panel on a work table, tap gently on one of the extremities of the end profil. Now remove it delicately and carefully. It will come off as one entire piece, and the lacquered finish will not be damaged or ruined.
You can find the video here.
In the price it is included the delivery “on the street” to the point of use. This means that there are no additional delivery costs, so delivery is free of charge. However, the driver of the truck is not obliged to carry the delivery into the house or in the apartment. Since our cabinets are robust and heavy versions, two physically fit people should accept the delivery and bring it into the house or appartement. Installation is not included, but can be booked. You can make a preliminary calculation of the assembly costs here.
In the configuration we show RAL colour examples. To answer our customer need we created an option and possibility to choose the other colours like Farrow & Ball or NCS colours. Just click on the box with the colour fan and write in the field, which will open, your chosen colour. However in our offer you can find some NCS or Farrow & Ball most requested ordered colours.
Yes, you can. Choose a colour or simply enter the desired RAL colour code in the place provided below. You can view a RAL colour palette in furniture stores and hardware stores – or simply order them online.
Attention: additional information regarding colours from Farrow and Ball, RAL, NCS, etc ..
We reproduce these colours starting from the colour cards of these international manufacturers. As for the Farrow and Ball finish, we do not offer the alternatives proposed by Farrow and Ball, but our finishes (matte or glossy).
We also remind you that the paint must be different depending on the surface on which it is applied and the method used. In addition, the colour rendering depends highly on the light in the room and how it reflects on the different surfaces. For this reason, if you are considering ordering a wardrobe of the same Farrow and Ball, RAL or NCS (or others) colour as the wall, please note that the two colours will never be perfectly identical, but very similar.
A tip to take into consideration: sometimes choosing a different colour that matches the wall is the most beautiful solution !!
Yes. Corner cupboards are ideal if there is enough space. This is usually the case from 2 meters per wall unit. We offer different solutions in the design of our fitted or freestanding wardrobes. Please contact us by e-mail at info@idaw.eu.
Take a look at our example videos which gives you a very good impression of the quality and colour of our cupboards. However if you still need to have a sample of the structure (melamined – ivory colour), we can send you one of dimension: 10 cm x 7 cm, for a processing fee of 15 € (including shipping costs). Regarding the lacquered doors colour, we can send you the sample of dimension: 20 cm x 20 cm for the processing fee of 45 € (including shipping costs). Please write us the email at info@idaw.eu for this request with the address where the sample must be sent. You will receive then the PayPall link for the payment. The production of the sample and the delivery will take 2-4 weeks.
Unfortunately not. Our deliveries require a certain flexibility and an agreed time window. Contact us by email to clarify other options.
We will inform you on the Saturday before the delivery week with an email about the scope of delivery and the planned delivery day. You will be contacted by our furniture shipping company in good time before the delivery, who will arrange a time slot with you for the delivery.
If we have not yet passed the order on to production, a change or addition is usually still possible. Please contact us as soon as possible. If we have already started to produce, a change is no longer possible, but an addition may still be possible.
Yes you can. Please contact us by email or write down your request in the comment field of the order form.
The end profil is a slight side panel that covers the visible front end of the wardrobe side.
Changing an end profil is quite easy, and you can easily do it yourself too. But remember that you should wear gloves as a safety precaution. After you have lain the wardrobe side panel on a work table, tap gently on one of the extremities of the end profil. Now remove it delicately and carefully. It will come off as one entire piece, and the lacquered finish will not be damaged or ruined.
You can find the video here.
The internal drawer dimensions for the 89 cm wide modules (with a cabinet depth of 61 cm) are: internal width approx. 72 cm, depth approx. 42.5 cm, height approx. 9.5 cm or front drawer approx. 12 , 8 cm.
The inner dimensions of the 96 cm wide modules are approx. 79 cm x approx. 42.5 cm x approx. 9.5 or approx. 12.8 cm.
The internal dimensions of the 103 cm wide modules are: approx. 86 cm x approx. 42.5 cm x approx. 9.5 or approx. 12.8 cm.
For a narrow cabinet module with a width of 43.2 cm, the inside dimensions of the drawer are: approx. 26.2 cm x approx. 42.5 cm x approx. 9.5 or approx. 12.8 cm.
For a narrow cabinet module with a width of 50.1 cm, the inside dimensions of the drawer are: approx. 33.1 cm x approx. 42.5 cm x approx. 9.5 or approx. 12.8 cm.
Unfortunately not. Our deliveries require a certain flexibility and an agreed time window. Contact us by email to clarify other options.
The internal dimensions of the pull-out shelves for an 89 cm module are: width approx. 79.6 cm, depth approx. 46.9 cm
The internal dimensions of the pull-out shelves for a 96 cm module are: width approx. 86.6 cm, depth approx. 46.9 cm
The internal dimensions of the pull-out shelves for a 103 cm module are: width approx. 93.6 cm, depth approx. 46.9 cm
For a narrow cabinet module with a width of 43.2 cm, the inside dimensions of the drawer are: width approx. 33.8 cm x depth approx. 46.9 cm
For a narrow cabinet module with a width of 50.1 cm, the inside dimensions of the drawer are: width approx. 40.7 cm x depth approx. 46.9 cm
In the price it is included the delivery “on the street” to the point of use. This means that there are no additional delivery costs, so delivery is free of charge. However, the driver of the truck is not obliged to carry the delivery into the house or in the apartment. Since our cabinets are robust and heavy versions, two physically fit people should accept the delivery and bring it into the house or appartement. Only for Switzerland you have only two chargeable delivery options: Delivery to the apartment; Delivery and installation.
In the configuration we show RAL colour examples. To answer our customer need we created an option and possibility to choose the other colours like Farrow & Ball or NCS colours. Just click on the box with the colour fan and write in the field, which will open, your chosen colour. However in our offer you can find some NCS or Farrow & Ball most requested ordered colours.
Unfortunately not, but exist drawers inside the wardrobe: We offer double and triple drawer modules. Look at our accessories.
Yes, you can. Choose a colour or simply enter the desired RAL colour code in the place provided below. You can view a RAL colour palette in furniture stores and hardware stores – or simply order them online.
Attention: additional information regarding colours from Farrow and Ball, RAL, NCS, etc ..
We reproduce these colours starting from the colour cards of these international manufacturers. As for the Farrow and Ball finish, we do not offer the alternatives proposed by Farrow and Ball, but our finishes (matte or glossy).
We also remind you that the paint must be different depending on the surface on which it is applied and the method used. In addition, the colour rendering depends highly on the light in the room and how it reflects on the different surfaces. For this reason, if you are considering ordering a wardrobe of the same Farrow and Ball, RAL or NCS (or others) colour as the wall, please note that the two colours will never be perfectly identical, but very similar.
A tip to take into consideration: sometimes choosing a different colour that matches the wall is the most beautiful solution !!
We can deliver the cabinet from 48 cm in all widths. In the configurator you can choose from different widths or specify the exact niche width. If you also want special dimensions, please contact us by e-mail to cristina@idaw.eu.
Yes. Corner cupboards are ideal if there is enough space. This is usually the case from 2 meters per wall unit. We offer different solutions in the design of our fitted or freestanding wardrobes. Please contact us by e-mail at cristina@idaw.eu.
A fitted wardrobe is a cupboard that can be installed in a wall niche. But it can also fill an entire room width. In any case, there are walls to the right and left of the fitted cupboard. As a rule, closing panels are mounted on the right and left in a plane with the doors, so that the niche is completely filled.
We will inform you on the Saturday before the delivery week with an email about the scope of delivery and the planned delivery day. You will be contacted by our furniture shipping company in good time before the delivery, who will arrange a time slot with you for the delivery.
We always deliver the drawer module completely, that means, that we provide a shelf for closing up. You place the module drawer on the cabinet base. However, if you want to mount it further up, you have to order one shelf from the accessories, on which you can install the drawer module at the position you want.
Yes, that does indeed exist: With the glass door cupboard “Open”. We offer a solution which, on the one hand, takes up many advantages of the walk-in wardrobe. Thanks to glass doors and side panels the daylight can pass through the entire storage space and create an open, non-constricting room image, while integrating the benefits of doors in this cupboard system.
We supply two clothes rails and one shelf per wardrobe module, but if you need more, you can buy more clothes rails on request. Write us in the comments field.
If we have not yet passed the order on to production, a change or addition is usually still possible. Please contact us as soon as possible. If we have already started to produce, a change is no longer possible, but an addition may still be possible.
With a cabinet height of up to 262 cm you can either have all or only a few mirrors made. You can select individual mirrored doors by first selecting the door handle model for the other doors. Then you will find the input field for the mirror doors in the configuration with the wording: “If you only want individual mirror doors, click here and enter the number and position.”
Yes you can. Please contact us by email or write down your request in the comment field of the order form.
Yes, there is. However, we recommend for optical reasons, to plan the cabinet up to 1 cm below the ceiling and leave this minimal gap open. Anyone wishing to close this narrow gap can use the joint sealer available in every hardware store, preferably in white or the ceiling color.
Of course, it is also possible to order a closing panel as an option, for example, if your room is higher than 295 cm, you have a very crooked ceiling, lamps are very close to the cabinet or you simply look for aesthetic reasons and need horizontal closing panel. To order it, just note your request in the comment field of the order form and write us the desired height of this panel and the lenght or the dimensions of the niche. In this case, we ask you of the additional cost of 120 euro for the closing bar.
Yes, they are. The door thickness of 18 mm is always included in the cabinet depth.
The terminal wardrobe sides as also the side panels of our wardrobes are 25 mm thick.
Yes, they are. The mirror doors you can also order in a grey tinted mirror. These cost 100,- € more per door than the normal mirror doors. Please select the regular mirrored doors and note your request in the comment field. To pay the difference, select the bank transfer for the entire order – or if chosen other payment, the additional amount must be payed by the bank transfer.
The interior of the wardrobe is only available in the melamined, ivory-colored version.
In this case you need a freestanding wardrobe and additionally a lacquered panel behind it. Just contact us by e-mail at cristina@idaw.eu.
In this case, the freestanding wardrobe is a good solution. You just push him into the corner. Upon request, we can also provide a mixed solution of free-standing wardrobe and fitted wardrobe. The free/visible cupboard side panel is then lacquered and the side in the corner receives a closing panel. If you want this solution, please contact us by e-mail at cristina@idaw.eu.
A fitted wardrobe is a cupboard that can be installed in a wall niche. But it can also fill an entire room width. In any case, there are walls to the right and left of the fitted cupboard. As a rule, closing panels are mounted on the right and left in a plane with the doors, so that the niche is completely filled.
Take a look at our example videos which gives you a very good impression of the quality and colour of our cupboards. However if you still need to have a sample of the structure (melamined – ivory colour), we can send you one of dimension: 10 cm x 7 cm, for a processing fee of 15 € (including shipping costs). Regarding the lacquered doors colour, we can send you the sample of dimension: 20 cm x 20 cm for the processing fee of 45 € (including shipping costs). Please write us the email at info@idaw.eu for this request with the address where the sample must be sent. You will receive then the PayPall link for the payment. The production of the sample and the delivery will take 2-4 weeks.
Changing a dust seal from a wardrobe door (for two people, it is a matter of few minutes):
- Check that the lenght of the substitutive dust seal is the same of the older one. In case the new dust seal is too long, shorten it accordingly. If it corresponds to the lenght of the older one, proceed as follows:
- Lay the door on the floor; it is better to lay it on a piece of cloth, so that the lacquered finish of the door will not be scratched.
- Mark the begining and the end of the older dust seal with a pencil, while it is still fixed on the door. If the new dust seal is not asseambled correctly, there is the risk that the door will not open.
- Start to gently remove the dust seal from the door a bit at a time, until you peel it off entirely in one piece; this whole passage has to be done while you lift the staples up.
- Now unroll the new dust seal and place it so that it sets on its proper place along the external edge.
- Before you fix the dust seal, check the dimensions of the screws we sent you: they should not be longer than the door’s thickness.
- Place the screws on the inner side of the door and over the dust seal (the screws should distance 10-15 cm from one another); screw the dust seal gently to the wooden pannel of the door.
- After that, clip the dust seal, beginnig either from the top or the bottom, until it is completely attached to the door (you should hear a „click“).
- Finally, reasseamble the door to the wardrobe.
You can find the video here.
The end profil is a slight side panel that covers the visible front end of the wardrobe side.
Changing an end profil is quite easy, and you can easily do it yourself too. But remember that you should wear gloves as a safety precaution. After you have lain the wardrobe side panel on a work table, tap gently on one of the extremities of the end profil. Now remove it delicately and carefully. It will come off as one entire piece, and the lacquered finish will not be damaged or ruined.
You can find the video here.
Before you begin to remove the mirror, remember that you should wear gloves as a safety precaution and put a piece of cloth underneath the door. The forst thing you have to do is to cover the whole mirror with adhesive tape in order to avoid further damages on the mirror. Then use a small tool (a plastic plaster would be perfect!) in order to pass between the mirror and the door and to lift the mirror up a little. Now start to peel it off slowly, safely and in one piece.
You can find a video here.
Kundenrezensionen
Our company collects ratings via the independent service provider SHOPVOTE and TRUSTPILOT. SHOPVOTE and TRUSTPILOT use automatic and manual measures to verify ratings. Information on the authenticity of customer ratings on SHOPVOTE can be found here. Information on the authenticity of customer ratings on TRUSTPILOT can be found here.
Alle Kommentare lesen...